Create an energy pyramid

Anyone who wants to make their own energy pyramid can do it very easily in the following way. The task is not difficult, because it does not require much time, cost or effort to build your own energy pyramid. You can use any material you want, paper, wire, plastic, copper, cardboard, etc. The size of the pyramid can be of any dimensions.

However, some rules must be followed. First, your pyramid will need to be an exactly proportional replica of the Great Pyramid of Giza.

Start by selecting the desired height of the pyramid (h). The length of the base is equal to a= h x 1.5708. The length of the side of the energy pyramid is s = h x  1.4949. See image for reference.

However, if you don't want to do the calculation, check the table with already calculated dimensions at the end of this text.

After choosing the dimensions of your energy pyramid, take your material and build your model. Try not to use artificial glues. If you are making a cardboard model, the easiest way is to draw the model on cardboard and then fold 3 sides, while sticking the 4 side with glue, so that only that side will be glued.

After building your energy pyramid it is time for experiments. During experiments, always position your pyramid in the north-south direction. When placing an object in a pyramid, then place it at 1/3 of the height of the pyramid, because that is the key point where energy accumulates and acts. The energy pyramid should be placed on a flat surface and not too close to electrical devices. The results may vary, depending on the material and positioning as well as the length of the experiment.