Zdrava Energija
Home
Blog & Teme
Kontakt
Professional approach to dowsing

Locating harmful radiation

Methodology of inspection of housing and radiation protection systems

Examination and remediation of harmful radiation inside residential and commercial buildings requires exceptional systematicity. Relying on proven techniques, pathogen zone mapping leaves no room for improvisation – each flow must be accurately documented in order to implement adequate protection.

Preparation and construction of the facility plan

Today, the hiring of experts for the inspection of closed spaces is considered a regular preventive measure in order to detect geopathological hazards. Although each practitioner develops his own work style over time, the basic and most important rule is that the process is carried out exclusively with written documentation. According to the old academic principle that nothing is left to the memory because it fades with time, the creation of a written report is imperative. A precise plan of pathogenic flows and nodes is a permanent document and key evidence of the performed analysis.

Before starting the measurements, it is absolutely necessary to provide or construct an accurate architectural plan of the apartment on the spot, usually in a scale of 1:50 or 1:100. The strict condition is that it must not be a flat and sketchy sketch, but an accurate sketch with the dimensions of all rooms measured in detail, on which the measurement results will be accurately applied later.

Systematic locating of underground and cosmic flows

Work in the field begins with locating the first pathogenic flow with the help of classical instruments. The detected flow is continuously monitored from its point of entry to its exit from the facility. Its exact width and direction are established, and all obtained parameters are instantly transferred to the apartment plan. The next step involves determining the energy polarity of that same stream.

This meticulous procedure is repeated until absolutely all the radiating lines crossing the living space are mapped. Maximum attention is paid to zones of long-term stay — bedrooms, children's beds and work surfaces. For final confirmation, a control pass through each room is performed. With complete mental concentration and an outstretched hand with the palm facing down, the remaining hidden knots of the cosmic webs are searched and charted. At the end, the complete report is authenticated with a signature and date.

Technopathy and radiation from household appliances

In addition to underground anomalies, the presence of technical radiation originating from the immediate environment must also be analyzed. The pendulum has proven to be an excellent tool for checking the intensity of electromagnetic smog emitted by household appliances. A special focus has always been placed on television and computer screens, the radiation of which is proportionally stronger the closer the person is to the device itself (while older models based on cathode ray tubes emitted a significantly higher level of radiation compared to newer technologies).

Neutralization of radiation with a copper spiral

One of the most well-known methods of radiation protection for television and similar devices involves making a horizontal spiral. It is constructed from non-insulated copper wire, optimal length 120 centimeters and section thickness 3 millimeters. The finished spiral should form a diameter of twenty centimeters. It is placed directly under the device so that the threads, viewed from above, strictly follow the clockwise direction. The outer end of the wire, which acts as a conductor for concentrated radiation, must be directed exclusively towards free space, strictly avoiding the direction towards the walls of adjacent rooms.

Possibilities of protection and placement of blockades

After the completion of the complete plan of pathogenic zones, the entire situation is presented in detail to the owner of the facility. It has always been the most effective, healthiest and safest protection measure physical moving of furniture outside the lines of detected radiation. No shield or blockade can completely replace the simple removal of the body from the pathogenic zone. Only if the architecture and narrowness of the space make it absolutely impossible to find a safe place for a bed or desk, alternative methods of blocking radiation are approached.

Protective barriers have been the subject of extensive research in professional circles for decades. A number of internationally patented products are available on the market today — special neutralization foils, absorption panels, and even recommendations for the installation of lead panels or barite plaster in walls and floors.

It is very interesting to point out that through practice ordinary straw has proven to be an excellent, natural insulator against harmful radiation. This information scientifically justifies the ancient folk observation that earlier generations did not suffer massively from severe and incurable diseases, because they slept on mats and mattresses filled with pure straw all their lives.

Physical principle of interference

From the point of view of pure physics, the protection mechanism is reduced to a very clear principle: if the amplitude of the pathogenic radiation is graphically displayed as a sinusoid, any effective protective means must generate radiation with a phase shift of exactly 180 degrees. In this way, perfect interference is created. A harmful wave is directly opposed by a wave of completely identical intensity, but of the opposite sign, which repels each other and brings the total level of radiation to zero.

Share this knowledge

Help others learn more about natural space harmonization.

Back to top